W SERIES INDUSTRIAL FIXED DISPLACEMENT PUMP
HYDRO LEDUC (Franc
W-series industrial fixed displacement pumps are designed for continuous operation in the most demanding applications. Intended for driving vehicles, machinery and other equipment. Appropriate for continuous, efficient operation with heavily used pump, for example: vehicle drives, drive and rotation of construction machinery, specialized equipment. The W series pumps can be used in closed operation system. They can be used as a replacement for A2FO Bosch-Rexroth. Spline or key shaft.
TECHNICAL SPECIFICATION:
- Displacement: 18-108 cm3/rev
- Max. flow absorbed: 57,70-172,80 l/min
- Torgue at 350 bar: 98-595 Nm/bar
- Maximum continuous pressure: 350 bar
- Maximum peak pressure: 450 bar
- Temperature range: -25 to 110 oC
- Maximum continuous speed: 1600- 3150 rpm
W SERIES PUMP TECHNOLOGI:
- bent axis design
- Wide range of rotational pump speed
- compact size
- low noise level
- high performance.
INDUSTRIAL FIXED DISPLACEMENT PUMP
HYDRO LEDUC (France)
Industrial fixed displacement pumps are intended for industrial use. Simple and durable axial-piston design with fixed cylinder block and oblique disk mounted on a shaft, rotated by the shaft results in alternate piston motion. Fluid flows into the pistons by the groove in an oblique disk and flows out by non-return valves with self-washing function. Double bearings carry the shaft loads, and the pump housing is made of forged steel. Perfect pump design results in failure-free operation and no wear and tear of live components.
TECHNICAL SPECIFICATION:
- Displacement: 1,56- 16 cm3/rev
- Maximum constant pressure: 200-600 bar
- Maximum peak pressure: 250-700 bar
- Maximum rotation speed: 2800-4000 rpm
- Maximum working temperature: 100 to 120 oC
- Weight: 3-9,2 kg.
INDUSTRIAL PUMP FEATURES:
- simple design
- failure-free operation
- high rotation speed and pressure range
- up-to-date technology
- perfect performance.
DELTA SERIES INDUSTRIAL VARIABLE DISPLACEMENT PUMP (SAE)
HYDRO LEDUC (France)
DELTA series industrial variable displacement pumps with integrated PC constant pressure control are intended especially for use in heavy industry: hydraulic press, manufacturing of composites etc. Pump output is proportional to the travel of a piston by adjustment of oblique disc angle. Change of disk inclination from maximum to minimum allows output adjustment from maximum to zero.
TECHNICAL SPECIFICATION:
- Displacement: 40-93 cm3/rev
- Maximum constant pressure: 380-400 bar
- Maximum peak pressure: 400-420 bar
- Maximum torque at 300 bar: 220-483 Nm
- Maximum rotation speed: 1900-3000 rpm
- Operation temperature range: -25 to 80 oC
- PC sensor - standard equipment
- Weight: 29 kg.
DELTA SERIES INDUSTRIAL PUMP (SAE) FEATURES:
- precise control of all operation movements
- multi-functional capabilities: simultaneous movement irrespective of the load
- no problems with working fluid overheating
- reduced fuel consumption.
CONTROL OPTIONS AVAILABLE FOR DELTA SERIES PUMP:
- PC - constant pressure (standard equipment)
- PCD - remote control constant pressure
- LS - flow pressure ragulation
- LSD - remote control flow-pressure regulation
- PCDM - constant pressure with minimum flow control
- KRC: adjustable displacement kit (close-off plate + fixation screw).
HYDROMIT - is active in the following fields:
hydraulic power components, industrial hydraulics, hydraulic piston and gear pumps, hydraulic rotators, hydraulic industrial pumps and motors, hydraulic accumulators, valves, distribution valves, micro hydraulic components, hydraulic micro pumps, hydraulic micro motors, drive systems, hydro accumulators, controls, cylinders, actuators, innovative equipment and manufactured to orders.
